Radar sensor RMS-AT-Adj
The radar sensor RMS-AT-Adj with adjustable sensitivity serves as a motion detector for approaching objects. It can be mounted directly in the application. The optimum sensitivity can then be adjusted precisely.
Special features include:
- easy adjustment of the sensitivity at site
- adjustable switching time of object recognition
- insensitive to lateral movements
- selection of the measuring range by horizontal or vertical mounting
- low power consumption
- concealed installation possible
- maintenance-free
The radar sensor RMS-AT-Adj is used in particular in the following areas:
- access and access control
- gate control
- identification of persons and objects
- directional motion detection
Article number | 80-201011 |
Article description | Radar sensor RMS-AT-Adj |
Scope of delivery | Radar sensor |
Parameter | Value | min. | typ. | max. |
Supply voltage | 10 VDC | 24 VDC | 30 VDC | |
Power consumption | 0,5 W | |||
Temperature range | - 20 °C | 60 °C | ||
Protection class | IP 67 | |||
Housing material | PC | |||
Dimensions | 56 x 46 x 22 mm |
Parameter | Value | min. | typ. | max. |
Detection range | 0,5 m | 5,0 m | ||
Angle of radiation, horizontal | 80 ° | |||
Angle of radiation, vertical | 32 ° | |||
Frequency | 24 GHz | |||
Transmission power | 15 dBm EIRP | |||
Signal output | active low / optocoupler, cascadable | |||
Connecting cable | 5 m LIYY 4 x 0,25 m² | |||
Direction | approaching | |||
Antenna direction | 0° | |||
Status LED | at the rear side |
Norm |
ETSI EN300440-1 V1.3.1 (2001-09) |
ETSI EN300440-2 V1.1.1 (2001-09 |
VDE 0848(08/2000) Part1 |
VDE 0848(01/1991) Part2 |
ICNIRP Guidelines (04/1998) |
EN50 081-1 |
EN50 082-1 |
Colour | Configuration |
brown | + 24 V DC |
white | GND |
green | Output optocoupler - |
yellow | Output optocoupler + |
Dateien
-
RMS-AT-Adj Technical data sheet
pdf | 589.91 KB | 1347 Besuche