SYCON 2800
The analyzer SYCON 2800 is a titration device. It knows no limits, but precisely measures the value of your water parameter to be determined. Thus, the analyzer Sycon 2800 is suitable for the fully automatic determination of water hardness. Its areas of application include, for example, the control of water blending systems.
The special features of the SYCON 2800 analyzer include:
- easy commissioning
- intuitive operation
- low maintenance
- self-calibrating
- diagnostic program
- maintenance-free full-colour sensor
- tool-free maintenance of the measuring chamber
The following functions are displayed reliably by the analyzer SYCON 2800:
- exact determination of the parameter defined by the indicator used
- alarm "lack of reagent" / BOB functionality
- graphic display
- installation wizard for quick configuration
- analysis startup options:
- automatically according to time interval or quantity-controlled analysis interval
- SD card for data storage (included)
- uncomplicated software update by copying the necessary files to the SD card
- CAN interface / remote control
| Article number | 30-010130 |
| Article description | Sycon 2800 |
| Scope of delivery | Analyzer, manual |
| Parameter | Value / Range |
| Supply voltage | 85 ... 265 VAC at 47 ... 440 Hz (230 V version) 24 VAC/ VDC +- 10 % (24 V version) |
| Power consumption | 25 VA (operating) 3,5 VA (standby condition) |
| Protection class | IP 43 - with housing IP 54 |
| Ambient temperature | 10 ... 45 °C |
| Temperature of measuring water | 5 ... 45 °C |
| Humidity | 20 ... 90 % RF not condensing |
| Parameter | Value / Range |
| Installation | wall mounting in closed rooms |
| Dimensions | on wall holder: 274 x 275 x 130 mm with housing (has to be ordered separately): 330 x 300 x 185 mm |
| Weight | on wall holder: 2,1 kg with housing: 4,0 kg |
| 4 Relais outputs |
max. 250 VAC / VDC 1 A as potential free outputs NC/NO The relays offer the following functions:
|
| 2 Signal inputs |
Galvanically isolated contacts Input 1:
Input 2:
|
| Analoguous output | 0 ... 20 mA / 4 ... 20 mA accuracy: 300 µA max. burden: 750 ohm |
| CAN interface |
adjustable Baud-rate: 10, 20 Kbit/s CAN 2.0A compatible suitable for Multimaster systems 3 adjustable frames:
|
| Parameter | Value / Range | |||||||||||||||||||||
| Measuring principle | colorimetric method (titration with colour change) | |||||||||||||||||||||
| Measuring range |
|
|||||||||||||||||||||
| Accuracy |
Measurement precision: Iteration precision:
Please note: |
|||||||||||||||||||||
| Reagent consumption | < 0,005 ... 0,5 ml / analysis depending on the measured water hardness |
|||||||||||||||||||||
| Duration of measurement | approx. 3 min, depending on the water hardness | |||||||||||||||||||||
| Quantity of analyses | max. approx. 10.000 analyses per 500 ml reagent with low water hardness. The consumption depends on the measured water hardness and the reagent used. | |||||||||||||||||||||
| Shelf-life of reagent | 24 months | |||||||||||||||||||||
| Water consumption | approx. 1000 ml / analysis The water consumption varies depending on the inlet pressure and the flushing duration. |
|||||||||||||||||||||
| Inflow pressure | approx. 0,5 ... 5 bar If the inlet pressure exceeds 2 bar a pressure reducer has to be used. |
|||||||||||||||||||||
| Water sample | clear, colourless, without solids, without gas bubbles
|
Attachments
-
Manual (GB)
pdf | 2.58 MB | 2163 hits -
Manuel d’utilisation (FRA)
pdf | 1.42 MB | 1549 hits -
Declaration of conformity Sycon 2800 (multi-lingual)
pdf | 60.41 KB | 1151 hits
