Sycon 2800

Print

The analyzer Sycon 2800 is a titration device. It knows no limits, but precisely measures the value of your water parameter to be determined. Thus, the analyzer Sycon 2800 is suitable for the fully automatic determination of water hardness. Its areas of application include, for example, the control of water blending systems.

The special features of the Sycon 2800 analyzer include:

  • easy commissioning
  • intuitive operation
  • low maintenance
  • self-calibrating
  • diagnostic program
  • maintenance-free full-colour sensor
  • tool-free maintenance of the measuring chamber

     

The following functions are displayed reliably by the analyzer Sycon 2800:

  • exact determination of the parameter defined by the indicator used
  • alarm "lack of reagent" / BOB functionality
  • graphic display
  • installation wizard for quick configuration
  • analysis startup options:
    • automatically according to time interval or quantity-controlled analysis interval
  • SD card for data storage (included)
    • uncomplicated software update by copying the necessary files to the SD card
  • CAN interface / remote control




Article number 30-010130
Article description Sycon 2800
Scope of delivery Analyzer, manual
Parameter Value / Range
Supply voltage 85 ... 265 VAC at  47 ... 440 Hz (230 V version)
24 VAC/ VDC +- 10 % (24 V version)
Power consumption 25 VA (operating)
3,5 VA (standby condition)
Protection class IP 43 - with housing IP 54
Ambient temperature 10 ... 45 °C
Temperature of measuring water 5 ... 45 °C
Humidity 20 ... 90 % RF not condensing

 

Parameter Value / Range
Installation wall mounting in closed rooms
Dimensions on wall holder:
274 x 275 x 130 mm
with housing (has to be ordered separately):
330 x 300 x 185 mm
Weight on wall holder: 2,1 kg
with housing: 4,0 kg
4 Relais outputs

max. 250 VAC / VDC 1 A as potential free outputs NC/NO

The relays offer the following functions:

  • limit value alarm 1
  • limit value alarm 2
  • device failure
  • analysis / cooler / pump
  • lack of reagent
2 Signal inputs

Galvanically isolated contacts

Input 1:

  • start analysis
  • contact water meter
  • flow meter
  • turbine

Input 2:

  • acknowledge error
Analoguous output 0 ... 20 mA / 4 ... 20 mA
accuracy: 300 µA
max. burden: 750 ohm
CAN interface

adjustable Baud-rate: 10, 20 Kbit/s

CAN 2.0A compatible

suitable for Multimaster systems

3 adjustable frames:

  • telemetry
  • status transmission
  • control and status request

 

Parameter Value / Range
Measuring principle colorimetric method (titration with colour change)
Measuring range
Total hardness Carbonate hardness unit
0,02 ... 30 0,3 ... 9,0 °dH
0,03 ... 37,6 0,4 ... 11,3 °e
0,04 ... 53,4 0,5 ... 16 °fH
0,36 ... 534 5,34 ... 160 ppm
0,0036 ... 5,35 0,107 ... 3,214 mmol/l
0,01 ... 10,7 - mval/l
Accuracy

Measurement precision:
+/- 5 % of the upper measuring value of the respectively used reagent

Iteration precision:
+/- 2,5 % of the upper measuring value of the respectively used reagent

 

Please note:
Depending on the contents in the water, there may be shifts in the measured value which influence the measuring accuracy. In such cases, we recommend to carry out a hardening test by hand titration and to calibrate the analyzer Sycon 2800 to this measured value.

Reagent consumption < 0,005 ... 0,5 ml / analysis
depending on the measured water hardness
Duration of measurement approx. 3 min, depending on the water hardness
Quantity of analyses max. approx. 10.000 analyses per 500 ml reagent with low water hardness. The consumption depends on the measured water hardness and the reagent used.
Shelf-life of reagent 24 months
Water consumption approx. 1000 ml / analysis
The water consumption varies depending on the inlet pressure and the flushing duration.
Inflow pressure approx. 0,5 ... 5 bar
If the inlet pressure exceeds 2 bar a pressure reducer has to be used.
Water sample clear, colourless, without solids, without gas bubbles
Parameter Value Unit
ph 4 ... 10,5   
iron < 3 ppm
copper < 0,2 ppm
aluminium < 0,1 ppm
manganese < 0,2 ppm
acid capacity KS 4.3 < 5 mmol/l

 

 

Ask about this product