The SYCON SiO2 is an analysis device for monitoring silicate / silicic acid on a mixed-bed filter.
Product information SYCON SiO2
- Monitoring of a freely programmable limit value
- Measurement of the silicate content in the range of 0.3 to 10 mg/l
- Automatic zero point adjustment before each measurement
- Graphic display, menu navigation in German, English, Italian, French, Spanish, Russian, Polish, Dutch and Danish.
- Easy commissioning using the installation assistant
- Documentation of all measurement results on an SD card
- Low maintenance effort thanks to hose pump technology and rinsing of the measuring cell with line pressure
- Self-calibrating against extraneous light, dirt and turbidity in the water sample
- Reliable through self-diagnosis and plausibility monitoring of the sensor data during the analysis
- Maintenance-free full-color sensor
- Ports:
- 4 potential-free outputs:
- Limit exceeded
- Exceeding the limit value / falling below the limit value / low indicator level
- Device failure
- Analysis active / cooling water valve / Indicator level low
- Current interface configurable as 0 - 20mA or 4 -20mA for measured value output or status message
- Input for potential-free contact for triggering an external analysis, water meter for quantity interval or pausing the internal analysis interval
- Input for remote rest via external control
- Modbus RTU for querying the measured values and device parameters by a PLC
- 4 potential-free outputs: