The SYCON Fe is an analysis device for measuring free iron in a water sample. In addition to the usual relays and input contacts, the online analysis device has a 20 mA current and RS485 interface with Modbus RTU protocol.
Product information SYCON Fe
- Monitoring of a freely programmable limit value
- Measurement of free iron content.
- Graphic display, menu navigation in German, English, Italian, French, Spanish, Russian, Polish, Dutch and Danish.
- Easy commissioning using the installation assistant
- Documentation of all measurement results on an SD card
- Low maintenance effort thanks to hose pump technology and rinsing of the measuring cell with line pressure
- Self-calibrating against extraneous light, dirt and turbidity in the water sample
- Reliable through self-diagnosis and plausibility monitoring of the sensor data during the analysis
- Maintenance-free full-color sensor
- Ports:
- 4 potential-free outputs:
- Limit exceeded
- Below limit value + indicator fill level low
- Device failure
- Analysis active / cooling water valve / Indicator level low
- Current interface configurable as 0 - 20mA or 4 -20mA for measured value output or status message
- Input for potential-free contact for triggering an external analysis, water meter for quantity interval or pausing the internal analysis interval
- Input for remote reset via external control
- Modbus RTU for querying the measured values and device parameters by a PLC
- 4 potential-free outputs:
The measuring range is determined by the indicator used in the FE series.
