Radar sensor RMS-2 (cable)

Print

The radar sensor RMS-2 (cable) with adjustable sensitivity is a motion detector. In contrast to other sensors, the RMS-2 distinguishes between approaching and removing objects. This information is available to the user via two separate switching outputs. The sensitivity of the device can be configured in four steps via an internal jumper strip. The RMS-2 (cable) is connected via a prefabricated connection cable.

 

Special features include:

  • easy adjustment of the sensitivity at site
  • adjustable switching time of object recognition
  • insensitive to lateral movements
  • selection of the measuring range by horizontal or vertical mounting
  • low power consumption
  • concealed installation possible
  • maintenance-free

 

The radar sensor RMS-2 (cable) is used in particular in the following areas:

  • access and access control
  • gate control
  • identification of persons and objects
  • directional motion detection

Article number 80-202001
Article description Radar sensor RMS-2 (cable)
Scope of delivery Radar sensor
Parameter Value min. typ. max.
Supply voltage   10 VDC   30 VDC
Power consumption      0,5 W  

Temperature range

  30 °C   80 °C
Protection class IP 66      
Housing material PC      
Dimensions 65 x 50 x 35 mm      

 

Parameter Value min. typ. max.
Detection range   1 m   6 m
Angle of radiation, horizontal     70 °  
Angle of radiation, vertical     36 °  
Transmission power     100 mW EIRP  
Signal output active low/high, push pull      
adjustable length of output pulse 1 s, 5 s, 10 s, 30 s      
Connecting cable 2 m LIYY 4 x 0,25 m²      
Direction approaching and/or departing      
Antenna direction      
Status LED inside      

 

Norm
ETSI EN300440-1 V1.3.1 (2001-09)
ETSI EN300440-2 V1.1.1 (2001-09
VDE 0848(08/2000) Part1
VDE 0848(01/1991) Part2
ICNIRP Guidelines (04/1998)
EN50 081-1
EN50 082-1

 

Colour Signal
brown 10 ... 30 V DC
yellow approaching
white GRD
green departing

Attachments

Ask about this product