Radar sensor RMS-AT
The radar sensor RMS-AT serves as a motion detector for approaching objects. The detection range is between approx. 0.5 m and 5.0 m. The range is set at the factory on the customer's request and varies depending on the size, shape and speed of the moving objects.
Special features include:
- low power consumption
- concealed installation possible
- maintenance-free
- simple installation
The radar sensor RMS-AT is used in particular in the following areas:
- access control
- gate control
- identification of persons and objects
- motion detection
| Article number | 80-201003 |
| Article description | Radar sensor RMS-AT |
| Scope of delivery | Radar sensor |
| Parameter | Value | min. | typ. | max. |
| Supply voltage | 10 VDC | 24 VDC | 30 VDC | |
| Power consumption | 0,5 W | |||
| Temperature range | - 20 °C | 60 °C | ||
| Protection class | IP 67 | |||
| Housing material | PC | |||
| Dimensions | 56 x 46 x 22 mm |
| Parameter | Value | min. | typ. | max. |
| Detection range | 0,5 m | 2,5 m | 5,0 m | |
| Angle of radiation, horizontal | 80 ° | |||
| Angle of radiation, vertical | 32 ° | |||
| Frequency | 24 GHz | |||
| Transmission power | 15 dBm EIRP | |||
| Signal output | active low / push pull | 200 mA | ||
| Connecting cable | 1 m LIYY 3 x 0,25 m² | |||
| Direction | approaching | |||
| Antenna direction | 0° |
| Norm |
| ETSI EN300440-1 V1.3.1 (2001-09) |
| ETSI EN300440-2 V1.1.1 (2001-09 |
| VDE 0848(08/2000) Part1 |
| VDE 0848(01/1991) Part2 |
| ICNIRP Guidelines (04/1998) |
| EN50 081-1 |
| EN50 082-1 |
| Colout | Configuration |
| brown | + 24 V DC |
| white | GND |
| green | Sensor Output |
Attachments
-
RMS-AT Technical data sheet Datenblatt
pdf | 574.75 KB | 1229 hits