The radar sensor RMS-2 (cable) with adjustable sensitivity is a motion detector. In contrast to other sensors, the RMS-2 distinguishes between approaching and removing objects. This information is available to the user via two separate switching outputs. The sensitivity of the device can be configured in four steps via an internal jumper strip. The RMS-2 (cable) is connected via a prefabricated connection cable.
Special features include:
The radar sensor RMS-2 (cable) is used in particular in the following areas:
Article number | 80-202001 |
Article description | Radar sensor RMS-2 (cable) |
Scope of delivery | Radar sensor |
Parameter | Value | min. | typ. | max. |
Supply voltage | 10 VDC | 30 VDC | ||
Power consumption | 0,5 W | |||
Temperature range |
30 °C | 80 °C | ||
Protection class | IP 66 | |||
Housing material | PC | |||
Dimensions | 65 x 50 x 35 mm |
Parameter | Value | min. | typ. | max. |
Detection range | 1 m | 6 m | ||
Angle of radiation, horizontal | 70 ° | |||
Angle of radiation, vertical | 36 ° | |||
Transmission power | 100 mW EIRP | |||
Signal output | active low/high, push pull | |||
adjustable length of output pulse | 1 s, 5 s, 10 s, 30 s | |||
Connecting cable | 2 m LIYY 4 x 0,25 m² | |||
Direction | approaching and/or departing | |||
Antenna direction | 0° | |||
Status LED | inside |
Norm |
ETSI EN300440-1 V1.3.1 (2001-09) |
ETSI EN300440-2 V1.1.1 (2001-09 |
VDE 0848(08/2000) Part1 |
VDE 0848(01/1991) Part2 |
ICNIRP Guidelines (04/1998) |
EN50 081-1 |
EN50 082-1 |
Colour | Signal |
brown | 10 ... 30 V DC |
yellow | approaching |
white | GRD |
green | departing |